Heavy-Duty Power and Free Conveyors for Powder Coating
Amber Industries designs, manufactures and installs power and free overhead conveyor systems for powder-coating lines, providing flexible material-handling solutions for large and heavy industrial components.
Our MCM Autotrack conveyor range transports suspended products through shotblasting, priming, painting, powder coating and oven curing. Unlike a continuously moving conveyor, a power and free system allows loads to stop, accumulate and follow different routes to suit individual production requirements.
Built for big steel. A recent MCM Autotrack 500 installation demonstrates how a conveyor system for powder coating can handle steel fabrications up to 10 metres long and weighing up to 4,500 kg per flightbar.
Why Choose a Power and Free Conveyor for a Powder Coating Line?
A powder-coating line involves several processes with different handling and operating requirements. Shotblasting, priming, powder application and oven curing may not all run at the same speed, particularly when processing components of different sizes or changing coating colours.
Unlike a conventional continuously moving chain conveyor, a power and free overhead conveyor allows individual loads to stop, accumulate or follow different routes while other products continue moving. This makes it a practical solution for mixed-product finishing lines.
Key advantages include:
- Independent process operation – Separately driven sections allow finishing areas to operate independently.
- Product accumulation – Suspended loads can wait between processes until the next stage is available.
- Flexible routing – Products can be directed to different finishing areas or curing ovens.
- Controlled loading and unloading – Powered drop sections can lower heavy components to suitable handling heights.
- Off-line maintenance – Dedicated spurs allow flightbars to be serviced away from the main production route.
Heavy-Duty Conveyor System for Powder Coating – Up to 4.5 Tonnes
Amber Industries supplied, installed and commissioned an MCM Autotrack 500 power and free overhead conveyor for a new industrial finishing facility incorporating shotblasting, priming, powder coating and oven curing.
Engineered for substantial steel fabrications, the system accommodates components measuring up to 10 metres long, 2.7 metres wide and 2.6 metres high, with a maximum load of 4,500 kg per flightbar. The installation was designed to handle six flightbars per hour.
Independent drives serve the shotblasting and powder-coating areas, allowing colour changes in the powder-coating booths without stopping blasting and priming operations. High-level accumulation provides buffer storage between stages to accommodate different processing times.
The powder coating conveyor system also incorporates two separate oven routes. Standard components can use a smaller, more economical oven, while oversized fabrications are directed through the larger oven. A dedicated maintenance spur allows flightbars to be removed from the main production route for servicing.
These features demonstrate how a heavy-duty paint finishing conveyor system can be configured around the dimensions, weights and processing requirements of the products being handled.
Designed for Efficient Powder-Coating Operations
Handling large steel fabrications through a powder-coating line requires more than overhead transportation. The conveyor must also provide controlled access for loading and unloading, operate within the finishing environment and incorporate appropriate safety measures.
Hydraulic Drop Sections and Loading Platforms
The Autotrack 500 installation incorporates hydraulic drop sections with 3 metres of vertical travel, allowing flightbars to be lowered for loading and unloading large components.
Reciprocating platforms provide controlled, push-button access at the loading and unloading stations, helping operators handle suspended steel fabrications at the designated working positions.
Oven Temperatures and Safety Features
The conveyor system was engineered to operate through curing ovens with temperatures of up to 220°C, accommodating the requirements of the finishing process.
Safety provisions include fall arrestors, guarding, light guards, pressure pads and a load-check gauge. These features form part of the installation's arrangements for handling heavy suspended loads.
A dedicated off-line maintenance spur allows flightbars to be serviced away from the main conveyor route, supporting maintenance access without occupying the main production path.
Autotrack 500 Powder-Coating Conveyor – Key Specifications
The following specifications relate to a completed MCM Autotrack 500 power and free overhead conveyor installation for a heavy-duty industrial finishing line. Each conveyor system is engineered to suit the products, processes and operating requirements of the application.
| Specification | Installation Details |
|---|---|
| Conveyor System | MCM Autotrack 500 power and free overhead conveyor |
| Application | Shotblasting, priming, powder coating and oven curing |
| Maximum Load | 4,500 kg per flightbar |
| Maximum Product Dimensions | 10 m long × 2.7 m wide × 2.6 m high |
| Designed Throughput | 6 flightbars per hour |
| Conveyor Control | Independent drives and high-level accumulation |
| Oven Routing | Two separate routes for standard and oversized components |
| Curing Oven Temperature | Up to 220°C |
| Hydraulic Drop Travel | 3 metres |
| Loading and Unloading | Hydraulic drop sections and reciprocating platforms |
| Maintenance | Dedicated off-line flightbar maintenance spur |
| Safety Features | Guarding, fall arrestors, light guards, pressure pads and load-check gauge |
Note: The specifications above relate to the featured MCM Autotrack 500 installation. Load capacities, product dimensions, throughput and operating limits are project-specific and should not be interpreted as standard specifications for all Autotrack 500 conveyor systems.
Looking for a Conveyor System for Powder Coating?
Amber Industries designs, manufactures and supplies conveyor systems for powder-coating and industrial paint finishing applications. Each system can be configured around your component dimensions, product weights, production throughput and finishing processes.
Whether you require a powder coating line conveyor for heavy steel fabrications, a flexible paint line conveyor system with accumulation and alternative process routes, or controlled loading and unloading, our MCM Autotrack power and free overhead conveyors can be tailored to your requirements.
From initial design and manufacture through to installation, commissioning and ongoing technical support, Amber provides conveyor solutions for demanding industrial finishing environments.
Learn more about our MCM Autotrack Power and Free Conveyor Systems, or contact Amber Industries to discuss your project.
Frequently Asked Questions About Powder-Coating Conveyor Systems
A power and free overhead conveyor is particularly suitable for powder-coating lines that handle products of different sizes, weights or finishing requirements. Unlike a continuously moving chain conveyor, it allows individual loads to stop, accumulate and follow different routes. Amber Industries' MCM Autotrack systems can be configured to transport suspended components through shotblasting, priming, powder coating and curing processes.
A power and free conveyor uses separate tracks for the powered chain and load-carrying trolleys. This arrangement allows suspended products to be moved, stopped or accumulated according to the needs of each process. In a powder-coating system, loads can wait between finishing stages or be directed towards different curing ovens without every product having to follow the same continuous route.
Yes. Power and free overhead conveyor systems can be engineered to transport large and heavy steel fabrications. One MCM Autotrack 500 installation supplied by Amber Industries was designed to handle loads of up to 4,500 kg per flightbar, with components measuring up to 10 metres long, 2.7 metres wide and 2.6 metres high. These are specifications for that particular installation rather than standard capacities for every Autotrack 500 system.
Yes, where the conveyor is designed with independently driven sections and suitable accumulation. In Amber's featured Autotrack 500 installation, independent drives serve the shotblasting and powder-coating areas. This allows colour changes in the powder-coating booths without stopping the blasting and priming operations. The exact arrangement depends on the layout and operating requirements of the finishing line.
Yes. A power and free overhead conveyor can incorporate alternative routes to suit different products and curing requirements. Amber's Autotrack 500 installation includes two separate oven routes, allowing standard components to use a smaller, more economical oven while oversized fabrications are directed through a larger oven. This provides flexibility when processing a mixture of component sizes.
Yes. Overhead conveyor systems can be engineered to transport suspended components through curing ovens as part of a powder-coating line. The featured Autotrack 500 installation was designed for oven operating temperatures of up to 220°C. The conveyor arrangement and components must be specified for the temperature and operating conditions of the particular application.
Power and free conveyor systems can incorporate powered drop sections to lower suspended loads for loading and unloading. Amber's featured installation uses hydraulic drop sections with 3 metres of vertical travel, together with reciprocating platforms for push-button loading and unloading. These arrangements provide controlled access to large steel fabrications at designated handling stations.
Accumulation allows suspended components to wait in designated areas of the conveyor system until the next finishing process is ready. This helps accommodate differences in processing times between shotblasting, priming, powder coating and curing. High-level accumulation can also provide buffer storage without requiring products to be removed from the overhead conveyor.
Safety equipment is specified according to the conveyor layout, suspended loads and operating environment. The featured Autotrack 500 installation includes guarding, fall arrestors, light guards, pressure pads and a load-check gauge. A dedicated maintenance spur also allows flightbars to be taken off the main conveyor route for servicing.
Amber Industries designs, manufactures, supplies and installs power and free overhead conveyor systems for industrial finishing applications. Conveyor layouts can be developed around component dimensions, load weights, required throughput, finishing stages and loading arrangements. To discuss a new powder-coating conveyor installation or the requirements of an existing finishing line, contact Amber Industries.