TSTR100 Powered Belt Curves for Intralogistics
The Gramac Quartz division of Amber Industries designs and manufactures the TSTR100 range of powered belt curve conveyors for warehouse and distribution centre intralogistics applications.
These high-speed, friction-driven belt curves are designed for reliable operation and long service life in demanding materials handling environments, including warehouses, post and parcel sorting depots, distribution centres and e-fulfilment facilities.
The TSTR100 range includes a variety of sizes and configurations to accommodate changes in conveyor direction within automated handling systems. The table below shows the most commonly specified sizes for intralogistics applications, with additional options available across the wider TSTR100 range.
Standard TSTR100 Belt Curve Sizes
The following inner radii, belt widths and standard angles are available for commonly specified TSTR100 intralogistics applications.
| Inner Radius(mm) | Belt Widths (mm) | Standard Angles ( ° ) |
|---|---|---|
| 800 | 600, 700, 800, 900 | 30°, 45°, 60°, 90°, 180° |
| 1000 | 900, 1000, 1100, 1200 | 30°, 45°, 60°, 90°, 180° |
| 1200 | 1000, 1100, 1200, 1300 | 30°, 45°, 60°, 90°, 180° |
| 1500 | 1100, 1200, 1300, 1500 | 30°, 45°, 60°, 90°, 180° |
Safe and Easy TSTR100 Belt Curve Maintenance
The TSTR100 range is designed to simplify routine maintenance and minimise the need for excessive manual handling or specialist tools.
- TSTR100 belt curves are designed for straightforward maintenance without excessive manual handling or the need for special tools.
- Moving-part guards are lightweight and easy to remove. The heaviest component is normally the motor unit, weighing up to 35 kg.
- Sealed-for-life bearings minimise lubrication requirements.
- Belts can be changed in under 20 minutes.
- Every belt curve is supplied with an operation and maintenance (O&M) manual detailing recommended periodic maintenance inspections.
These maintenance features help make the TSTR100 range suitable for intralogistics operations where reliable conveyor performance and efficient servicing are important.
Frequently Asked Questions About Intralogistics Belt Curves
Gramac Quartz TSTR100 powered belt curves are designed for intralogistics applications, including warehouses, distribution centres, post and parcel sorting depots, and e-fulfilment facilities. They enable conveyed products to change direction within a conveyor system.
The standard TSTR100 angles listed for intralogistics applications are 30°, 45°, 60°, 90° and 180°. The appropriate angle depends on the required conveyor route and installation layout.
Commonly specified TSTR100 intralogistics belt curves have inner radii of 800 mm, 1,000 mm, 1,200 mm and 1,500 mm, with belt widths ranging from 600 mm to 1,500 mm depending on the selected radius. Additional sizes are available within the wider TSTR100 range. The technical table on this page shows the standard combinations.
TSTR100 belt curves are designed to allow belts to be changed in under 20 minutes. This helps reduce maintenance downtime, with replacement carried out in accordance with the manufacturer's operation and maintenance instructions.
TSTR100 belt curves feature lightweight, removable moving-part guards and sealed-for-life bearings that minimise lubrication requirements. They are designed for maintenance without special tools, and each curve is supplied with an operation and maintenance (O&M) manual detailing recommended periodic inspections. The heaviest component is normally the motor unit, weighing up to 35 kg.
Powered belt curves allow parcels and other conveyed products to follow changes in direction as they move through a handling system. This helps conveyor routes fit within warehouse and distribution centre layouts while maintaining powered product movement between adjoining conveyor sections.