Belt Curve Technical Data & Specifications
Operating Specifications
| Belt Curve Model | Max Load Capacity (Kg/m*) |
Ambient Operating Temp (°C) | Max Speed Measured on C/L (M/s*) |
Running Noise @ 1m (Dba) | Max Pulley Diameter (mm) | Min Pulley bearing L10 life |
|---|---|---|---|---|---|---|
| TS-TR150 AIRPORT BELT CURVE | 100 | -15 to +55 | 2.5 | 65 or less | 150 | 50000 |
| TS-TR100 BELT CURVES FOR INTRLOGISTICS | 60 | -15 to +55 | 2.0 | 65 or less | 100 | 50000 |
| TS-TR100 BELT CURVES FOR INDUSTRY | 50 | -15 to +55 | 2.0 | 65 or less | 100 | 50000 |
| TR200 HEAVY DUTY BELT CURVE | 200 | -15 to +55 | 1.5 | 65 or less | 200 | 50000 |
* Measured along the Centre line of the belt curve.
Dimensions
| Belt Curve Model | Overall Frame Depth (mm) |
Top of Belt to under-side of Frame (mm) |
Max overhang at end of Frame (mm) |
Width of Frame at Outer Rad (mm) |
|---|---|---|---|---|
| TS-TR150 AIRPORT BELT CURVE | 320 | 270 | 25 | 80 |
| TS-TR100 BELT CURVES FOR INTRLOGISTICS | 260 | 215 | 20 | 70 |
| TS-TR100 BELT CURVES FOR INDUSTRY | 260 | 215 | 20 | 70 |
| TR200 HEAVY DUTY BELT CURVE | 370 | 315 | 25 | 80 |
| GRAMAC TS-TR150 BELT CURVES | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Failure Modes, Mean Time Before Faiure (MTBF) Data (Assumes ambient conditions) | |||||||||||||||
| Angle | 30° | 45° | 60° | 90° | 180° | ||||||||||
| Speed at C/L | 0.5 M/s |
1.0 M/s |
1.5 M/s |
0.5 M/s |
1.0 M/s |
1.5 M/s |
0.5 M/s |
1.0 M/s |
1.5 M/s |
0.5 M/s |
1.0 M/s |
1.5 M/s |
0.5 M/s |
1.0 M/s |
1.5 M/s |
| Belt Assembly C/W Guide Rollers | 40000 hrs |
35000 hrs |
30000 hrs |
40000 hrs |
35000 hrs |
30000 hrs |
40000 hrs |
35000 hrs |
30000 hrs |
40000 hrs |
35000 hrs |
30000 hrs |
40000 hrs |
35000 hrs |
30000 hrs |
| Lagged Conical Drive Pulley | 40000 hrs |
40000 hrs |
35000 hrs |
40000 hrs |
40000 hrs |
35000 hrs |
40000 hrs |
40000 hrs |
35000 hrs |
40000 hrs |
35000 hrs |
35000 hrs |
35000 hrs |
30000 hrs |
30000 hrs |
| Conical Tall Pulley | 50000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
50000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
50000 hrs |
40000 hrs |
| Pulley Mounting Bearings | 50000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
50000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
50000 hrs |
40000 hrs |
50000 hrs |
50000 hrs |
40000 hrs |
| TSTR150 Belt Curves - Mean Time to Repair (MTTR) Data | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Angle | 30° | 45° | 60° | 90° | 180° | |||||
| Location of Geared Motor | Inner Radius | Outer Radius | Inner Radius | Outer Radius | Inner Radius | Outer Radius | Inner Radius | Outer Radius | Inner Radius | Outer Radius |
| Belt Assembly C/W Guide Rollers | 17 mins | 15 mins | 17 mins | 15 mins | 19 mins | 17 mins | 20 mins | 18 mins | 24 mins | 22 mins |
| Lagged Conical Drive Pulley | 24 mins | 28 mins | 24 mins | 28 mins | 24 mins | 28 mins | 24 mins | 28 mins | 24 mins | 28 mins |
| Conical Tail Pulley | 21 mins | 25 mins | 21 mins | 25 mins | 21 mins | 25 mins | 21 mins | 25 mins | 21 mins | 25 mins |
| Pulley Mounting Bearings | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end | 17 mins or 22 mins at GMU end |
Weights
| TSTR150/2065/1030/A Airport Belt Curves - Weights of curves including Std SEW SA series GMU and 400mm high sidewalls, but excluding any support structures | ||||
|---|---|---|---|---|
| Angle of Curve | 30° | 45° | 60° | 90° |
| Weight (Kg) | 185 | 240 | 290 | 390 |
For non standard angles, take 85Kg off the above figures for the pulleys and GMU, pro rata the weight from the nearest angle to give a good approximation.
The TSTR150/2065/1030 Airport Belt Curve is approx. 12% lighter than it preceding model TR150/1985/1030/A because the lower bed / fixed integral under-guard has been eliminated in favour of a much lighter removeable under-guard.
Standard Sizes & Technical Data
Model Ref: TR100
- Max Loading = 50Kg/m measured along C/L
- Top of Belt to underside frame = 215mm
- Minimum pulley bearing L10 life = 50,000
- GMU: SEW SA47 (E2, IP54) helical worm gear as std
- Motor position: outside radius at discharge end as std
- Running Noise level: Dba @ 1m = 65 Dba or less
- Belt change time within 20 minutes
- Belts positively tracked by roller bearings fitted to outer edge
- Overall frame depth = 250mm
- Max overhang of end of frame to pulley = 25mm
- Tapered End Pulley Major Diameter = 100mm
- Std = 400V, 3ph, 50Hz supply (no controls included)
- Max Speed range (measured on C/L) = 2.0 M/s
- Ambient temperature range: -15°C to + 55°C
- High density Polypropylene Tapered End Pulleys
- Robust & rigid fabricated mild steel frame
| Outer Belt Rad (mm) |
Effective Belt Width (mm) |
Inner Belt Rad (mm) |
Nominal C/L Rad (mm) |
A) = Subtended Angles (degrees) |
Model Designation | Link to Autocad | ||
|---|---|---|---|---|---|---|---|---|
| 45° | 90° | 180° | ||||||
| 700 | 300 | 400 | 550 | X | TR100/700/300/(A) |  |
||
| 700 | 400 | 300 | 500 | X | TR100/700/400/(A) | |
||
| 750 | 300 | 450 | 600 | X | TR100/750/300/(A) | |
||
| 800 | 400 | 400 | 600 | X | TR100/800/400/(A) | |
||
| 800 | 500 | 300 | 550 | X | TR100/800/500/(A) | |
||
| 1000 | 300 | 700 | 850 | X | TR100/1000/300/(A) | |
||
| 1000 | 400 | 600 | 800 | X | X | TR100/1000/400/(A) | |
|
| 1000 | 500 | 500 | 750 | X | TR100/1000/500/(A) | |
||
| 1000 | 600 | 400 | 700 | X | TR100/1000/600/(A) | |
||
| 1100 | 500 | 600 | 850 | X | X | X | TR100/1100/500/(A) | |
| 1100 | 600 | 500 | 800 | X | X | TR100/1100/600/(A) | |
|
| 1200 | 500 | 700 | 950 | X | X | TR100/1200/500/(A) | |
|
| 1200 | 600 | 600 | 900 | X | X | X | TR100/1200/600/(A) | |
| 1300 | 500 | 800 | 1050 | X | X | TR100/1300/500/(A) | |
|
| 1300 | 600 | 700 | 1000 | X | X | TR100/1300/600/(A) | |
|
| 1300 | 700 | 600 | 950 | X | X | X | TR100/1300/700/(A) | |
| 1430 | 500 | 930 | 1180 | X | X | TR100/1430/500/(A) | |
|
| 1430 | 600 | 830 | 1130 | X | X | TR100/1430/600/(A) | |
|
| 1430 | 700 | 730 | 1080 | X | X | TR100/1430/700/(A) | |
|
| 1430 | 800 | 630 | 1030 | X | X | X | TR100/1430/800/(A) | |
| 1500 | 500 | 1000 | 1250 | X | X | TR100/1500/500/(A) | |
|
| 1500 | 600 | 900 | 1200 | X | X | TR100/1500/600/(A) | |
|
| 1500 | 700 | 800 | 1150 | X | X | TR100/1500/700/(A) | |
|
| 1500 | 800 | 700 | 1100 | X | X | TR100/1500/800/(A) | |
|
| 1600 | 600 | 1000 | 1300 | X | X | TR100/1600/600/(A) | |
|
| 1600 | 700 | 900 | 1250 | X | X | TR100/1600/700/(A) | |
|
| 1600 | 800 | 800 | 1200 | X | X | X | TR100/1600/800/(A) | |
Model Ref: TS-TR100
- Max Loading = 75Kg/m measured along C/L
- Top of Belt to underside frame = 215mm
- Minimum pulley bearing L10 life = 50,000
- GMU: SEW SA47 (E2, IP54) helical worm gear as std
- Motor position: outside radius at discharge end as std
- Running Noise level: Dba @ 1m = 65 Dba or less
- Belt change time within 20 minutes
- Belts positively tracked by roller bearings fitted to outer edge
- Overall frame depth = 250mm
- Max overhang of end of frame to pulley = 25mm
- Tapered End Pulley Major Diameter = 100mm
- Std = 400V, 3ph, 50Hz supply (no controls included)
- Max Speed range (measured on C/L) = 2.5 M/s
- High density Polypropylene Tapered End Pulleys
- Robust & rigid fabricated mild steel frame
| Outer Belt Rad (mm) |
Effective Belt Width (mm) |
Inner Belt Rad (mm) |
Nominal C/L Rad (mm) |
A) = Subtended Angles (degrees) |
Model Designation | Link to Autocad | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 30° | 45° | 60° | 90° | 180° | ||||||
| 1700 | 900 | 800 | 1250 | X | X | TS-TR100/1700/900/(A) | |
|||
| 1800 | 900 | 900 | 1350 | X | X | TS-TR100/1800/900/(A) | |
|||
| 1900 | 900 | 1000 | 1450 | X | X | X | X | X | TS-TR100/1900/900/(A) | |
| 2000 | 900 | 1100 | 1550 | X | X | X | X | X | TS-TR100/2000/900/(A) | |
Model Ref: TS-TR150
(Specifically designed for integration into low to medium capacity airport baggage handling systems).
- Max Loading = 90Kg/m measured along C/L
- Top of Belt to underside frame = 270mm
- Minimum pulley bearing L10 life = 50,000
- GMU: SEW SA47 (E2, IP54) helical worm gear as std
- Motor position: outside radius at discharge end as std
- Running Noise level: Dba @ 1m = 65 Dba or less
- Belt change time within 20 minutes
- Belts positively tracked by roller bearings fitted to outer edge
- Overall frame depth = 320mm
- Max overhang of end of frame to pulley = 25mm
- Tapered End Pulley Major Diameter = 150mm
- Std = 400V, 3ph, 50Hz supply (no controls included)
- Max Speed range (measured on C/L) = 2.5 M/s
- Ambient temperature range: -15°C to + 55°C
- High density Polypropylene Tapered End Pulleys
- Robust & rigid fabricated mild steel frame
| Outer Belt Rad (mm) |
Effective Belt Width (mm) |
Inner Belt Rad (mm) |
Nominal C/L Rad (mm) |
A) = Subtended Angles (degrees) |
Model Designation | Link to Autocad | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 30° | 45° | 60° | 90° | 180° | ||||||
| 1985 | 1030 | 955 | 1470 | X | X | X | X | X | TS-TR150/1985/1030/(A) | |
| 2065 | 1030 | 1035 | 1550 | X | X | X | X | X | TS-TR150/2065/1030/(A) | |
| 2215 | 1030 | 1185 | 1700 | X | TS-TR150/2215/1030/(A) | |
||||
| 2100 | 1100 | 1000 | 1550 | X | X | X | X | TS-TR150/2100/1100/(A) | |
|
Model Ref: TR150
- Quick release frame allows belt change in 12 mins
- Overall frame depth = 320mm
- Max overhang of end of frame to pulley = 25mm
- Tapered End Pulley Major Diameter = 150mm
- GMU: SEW SA47 (E2, IP54) helical worm gear as std
- Std = 400V, 3ph, 50Hz supply (no controls included)
- Running Noise level: Dba @ 1m = 65 Dba or less
- Belts positively tracked by roller bearings fitted to outer edge
- Max Loading = 110Kg/m measured along C/L
- Top of Belt to underside frame = 270mm
- Minimum pulley bearing L10 life = 50,000
- Max Speed range (measured on C/L) = 2.5 M/s
- PMM Drives can be fitted as an option
- Motor position: outside rad at discharge end as std
- Ambient temperature range: -15°C to + 55°C
- High density Polypropylene Tapered End Pulleys
| Outer Belt Rad (mm) |
Effective Belt Width (mm) |
Inner Belt Rad (mm) |
Nominal C/L Rad (mm) |
A) = Subtended Angles (degrees) |
Model Designation | Link to Autocad | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 30° | 45° | 60° | 90° | 180° | ||||||
| 1600 | 800 | 800 | 1200 | X | X | X | X | X | TR150/1600/800/(A) | |
| 1715 | 1030 | 685 | 1200 | X | X | TR150/1715/1030/(A | |
|||
| 1765 | 1030 | 735 | 1250 | X | X | TR150/1765/1030/(A)) | |
|||
| 1815 | 1030 | 785 | 1300 | X | X | X | TR150/1815/1030/(A) | |
||
| 1885 | 1030 | 855 | 1370 | X | X | X | TR150/1885/1030/(A) | |
||
| 1915 | 1030 | 885 | 1400 | X | X | X | TR150/1915/1030/(A)* | |
||
| 1985 | 1030 | 955 | 1470 | X | X | X | X | X | TR150/1985/1030/(A)* | |
| 2015 | 1030 | 985 | 1500 | X | X | X | TR150/2015/1030/(A) | |
||
| 2065 | 1030 | 1035 | 1550 | X | X | X | X | X | TR150/2065/1030/(A)* | |
| 2115 | 1030 | 1085 | 1600 | X | X | X | TR150/2115/1030/(A) | |
||
| 2185 | 1230 | 955 | 1570 | X | X | X | X | X | TR150/2185/1230/(A)** | |
| 2215 | 1030 | 1185 | 1700 | X | TR150/2215/1030/(A)* | |
||||
| 2265 | 1230 | 1035 | 1650 | X | X | X | X | X | TR150/2265/1230/(A)** | |
| 2315 | 1030 | 1285 | 1800 | X | X | TR150/2315/1030/(A) | |
|||
| 2515 | 1230 | 1285 | 1900 | X | X | TR150/2515/1230/(A) | |
|||
| 2865 | 1030 | 1835 | 2350 | X | X | TR150/2865/1030/(A) | |
|||
| 3495 | 1030 | 2465 | 2980 | 15° | 15° | 15° | 15° | 15° | TR150/3495/1030/(A)* | |
*Indicates models suitable for integration into airport baggage handling systems.
**Indicates models suitable for Out of Gauge airport baggage handling systems lines.
N.B. In addition to the above standard sizes TR150 Belt Curves can be manufactured to special order with an outside radius of up to 3500 mm and a max belt width of 1500mm. Please contact a GRAMAC QUARTZ representative to discuss your requirements.
Model Ref: TR150 Spirals
The following models can be manufactured as spiral belt curves with a change in elevation in 90° from 200mm rising in 50mm increments to a maximum of 500mm (pro rata for different angles).
- Quick release frame allows belt change in 15 mins
- Max overhang of end of frame to pulley = 25mm
- Tapered End Pulley Major Diameter = 150mm
- GMU: Braked SEW SA47 (E2, IP54) helical worm gear as std
- Std = 400V, 3ph, 50Hz supply (no controls included)
- Running Noise level: Dba @ 1m = 65 Dba or less
- Belts positively tracked by roller bearings fitted to outer edge
- Max Loading = 110Kg/m measured along C/L
- Minimum pulley bearing L10 life = 50,000
- Max Speed range (measured on C/L) = 2.5 M/s
- PMM Drives can be fitted as an option
- Motor position: outside rad at discharge end as std
- Ambient temperature range: -15°C to + 55°C
- High density Polypropylene Tapered End Pulleys
| Outer Belt Rad (mm) |
Effective Belt Width (mm) |
Inner Belt Rad (mm) |
Nominal C/L Rad (mm) |
A) = Subtended Angles (degrees) |
Model Designation | Link to Autocad | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 30° | 45° | 60° | 90° | 180° | ||||||
| 1915 | 1030 | 885 | 1400 | X | X | X | TR150/1915/1030/(A)SP | |
||
| 1985 | 1030 | 955 | 1470 | X | X | X | X | TR150/1985/1030/(A)SP | |
|
| 2065 | 1030 | 1035 | 1550 | X | X | X | X | TR150/2065/1030/(A)SP | |
|
| 2185 | 1230 | 955 | 1570 | X | X | TR150/2185/1030/(A)SP | |
|||
| 2215 | 1030 | 1185 | 1700 | X | TR150/2215/1030/(A)SP | |
||||
| 2215 | 1230 | 1035 | 1650 | X | X | TR150/2265/1230/(A)SP | |
|||
| 2315 | 1030 | 1285 | 1800 | X | X | TR150/2315/1030/(A)SP | |
|||
NB:
i) In addition to the angle and change of elevation the direction of rise or fall of a spiral bend must be specified.
ii) Spiral curves are supplied with a braked motor and high grip face belt as standard.
Model Ref: TR200
- Max Loading = 200Kg/m measured along C/L
- Top of Belt to underside frame = 315 mm
- Minimum pulley bearing L10 life = 50,000
- GMU: SEW SA47 (E2, IP54) helical worm gear as std
- Motor position: outside radius at discharge end as std
- Running Noise level: Dba @ 1m = 65 Dba or less
- Belt change time within 20 minutes
- Belts positively tracked by roller bearings fitted to outer edge
- Overall frame depth = 370 mm
- Max overhang of end of frame to pulley = 25mm
- Tapered End Pulley Major Diameter = 200mm
- Std = 400V, 3ph, 50Hz supply (no controls included)
- Max Speed range (measured on C/L) = 2.5 M/s
- Ambient temperature range: -15°C to + 55°C
- High density Polypropylene Tapered End Pulleys
- Robust & rigid fabricated mild steel frame
| Outer Belt Rad (mm) |
Effective Belt Width (mm) |
Inner Belt Rad (mm) |
Nominal C/L Rad (mm) |
A) = Subtended Angles (degrees) |
Model Designation | ||
|---|---|---|---|---|---|---|---|
| 30° | 90° | 180° | |||||
| 1300 | 600 | 700 | 1000 | X | X | TR200/1300/600/(A) | |
| 1500 | 400 | 1100 | 1300 | X | X | TR200/1500/400/(A) | |
| 1500 | 600 | 900 | 1200 | X | X | TR200/1500/600/(A) | |
| 1800 | 600 | 1200 | 1500 | X | X | X | TR200/1800/600/(A) |
| 2100 | 600 | 1500 | 1800 | X | X | X | TR200/2100/600/(A) |
| 2100 | 800 | 1300 | 1700 | X | X | X | TR200/2100/800/(A) |
| 2500 | 600 | 1900 | 2200 | X | X | X | TR200/2500/600/(A) |
| 2500 | 800 | 1700 | 2100 | X | X | X | TR200/2500/800/(A) |
NB:
In addition to the above standard sizes TR200 Belt Curves can be manufactured to special order with an outside radius of up to 3000 mm and a max belt width of 1500mm. Please contact a GRAMAC QUARTZ representative to discuss your requirements.